TRANSFER FOIL INSTRUCTIONS:
1. Starting with dry nail, brush on adhesive lightly and evenly.
2. Allow adhesive to dry completely. (It will brush on milky & turn clear but remain tacky)
DO NOT TOUCH ADHESIVE AFTER IT HAS DRIED
3. 1) Cut Foil to desired length
2) press onto nail (shiny or pattern side up)
3) Rub firmly over entire surface of Foil piece.
4. Gently peel back clear acetate backing and apply Top Coat to entire nail.
HELPFUL HINT: When applying Top Coat DO NOT drag brush repeatedly over
the nail. Apply in one stroke and allow to dry completely before applying more Top
Coat to add any nail gems or other enhancements.
Transfer Foil may be used to cover entire nail or only portions. When covering entire nail
it is not necessary to polish nail with color first. Use Transfer Foil Adhesive sparingly
and allow to dry completely before applying Transfer Foil. To speed up drying use a
small blow dryer on low heat setting.
Please note: After applying top coat the foil pattern will crinkle. Most of this will
smooth out once the top coat dries. This is how the adhesive interacts with the polish. If
the foil becomes dull and/or the pattern smears then the top coat is too harsh. We
recommend using a light top coat directly over the foil. We do not
recommend using a fast drying or super shine top coat directly on the foil.
TIPS FROM OUR CUSTOMERS
For a completely smooth finish you can use a light Gel sealer. Apply as usual and
use UV light as directed. The Gel sealer works especially well on the holographic
patterns.
